DEUTSCH
DMC-M Series
Multicavity EN4165 Connectors
The Rugged, Modular Solution for
Flexible, Reliable Aerospace Connectivity
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH
DMC-M
Multicavity Connectors
Table of Contents
Introduction 4
Typical Configuration
6
Specifications 7
Receptacles
Dimensional Drawings
8
Part Numbering System
10
Multi-Receptacle Plates
12
Receptacle Keying
13
Plugs
Dimensional Drawings
14
Part Numbering System
16
Plug Keying
18
Modules
Overview and Dimensions
19
Part Numbering System
22
Accessories
Shielded Accessory Bodies
27
Nonshielded Cable Clamps
29
Chimneys for Shielded Accessories
30
Masses 32
Contacts and Tooling
Electrical Contacts and Tooling
36
Fiber Optic Termini
38
Fiber Optic Tool Kits and Training
39
Panel Cutouts 40
Connector Tooling 41
User Manual 42
Flexible Modularity
Rugged for Harsh Environments
EN4165 Compliant
DEUTSCH DMC-M Series
Multicavity EN4165
MODULARITY
•C
rimp and PCB contacts size 24
to size 08
•S
ignal, coaxial, microcoax,
Quadrax, power, optical,
thermocouple contacts
• High-speed Ethernet modules
• Aluminum cable compliant
FLEXIBLE
•E
asily replaced modules for fast
reconfiguration
•A
llows mixing of male and female
modules in each connector half
•W
ide range of modules allows
great flexibility in input/output
configurations
WEIGHT OPTIMIZATION
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
FLEXIBLE MODULARITY
Modular, Compact, and Weight Saving
Originally designed in the 1980s, DEUTSCH DMC-M
connectors from TE Connectivity (TE) have evolved into
one of the most widely used connector styles for cabin
applications in commercial aerospace. Standardized in
European Standard EN4165, DMC-M connectors provide
a modular, flexible, and reliable system. The connectors
are available in both multi-cavity and single-module
configurations, using the same modules, to provide compact,
lightweight connectivity.
Gain Flexibility
Today this connector continues to attract new users and
applications because of its modularity, space/weight
savings and robustness. In addition, it has evolved to include
composite housings, aluminum wire capability, fiber optics,
higher densities, and shunting configurations.
Save Weight
The DMC-M shells are available in lightweight aluminum alloy
or composite, with nickel or cadmium plating, to withstand
harsh environments. For EMI protection, the connectors use
360° shielding on the shell interfaces.
•N
ickel or cadmium-plated
composite shells
30-22 insert Purple interior
• Compact solution
EASY TO INSTALL
• 36 keying possibilities
Space Savings
• Quick-install coupling
RELIABLE
1
• Environmental sealing
22
1
22
1
22
• Vibration resistant
1
•E
MI protection as per
EN4165 standard
22
•M
eets FAA flammability, smoke, and
toxicity requirements
1
22
1
22
1
22
1
22
1
22
• EN4165 and BACC65 compliant
Circular Connectors
Insert 13-35
Size 22 Contacts, 5A
198 contacts
309 g (without panel)
36 mounting screws
9 panel cutouts
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 4
DMC-M Connectors
Insert 20-22
Size 22 Contacts, 5A
320 contacts
149 g (without panel)
10 mounting screws
1 panel cutout
DMC-M Connectors
Insert 30-23
Size 23 Contacts, 5A
480 contacts
175 g (without panel)
10 mounting screws
1 panel cutout
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 5
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
TYPICAL CONFIGURATIONS
SPECIFICATIONS
Wire-to-Board Configuration
MATERIALS
1
2
3
4
5
6
7
8
9
10
11
• Shell: A
luminum alloy or composite, with electroless nickel or
olive drab cadmium finish
• Module: Thermoplastic and fluorinated silicone
• Contact: Copper alloy, plated gold over nickel
• Key: Aluminum alloy, with stainless steel lock nut
12
MECHANICAL/ENVIRONMENTAL
Durability: 500 mating cycles
Operating Temperature: -55°C to +175°C
Module Retention In Housing: ≥ 25.4 daN (57.1 lb.)
Contact Retention:
Size 24: 2.7 daN (6.1 lb.)
Size 23: 4.5 daN (10.1 lb.)
Size 22: 4.5 daN (10.1 lb.)
Size 20: 9.0 daN (20.2 lb.)
Size 16: 11.0 daN (24.7 lb.)
Size 12: 13.0 daN (29.2 lb.)
Size 08: 15.6 daN (35.1 lb.)
• Salt Spray:
Aluminum cadmium finish: 500 hours
Aluminum nickel finish: 96 hours
Composite nickel finish: 500 hours
•
•
•
•
1
2
3
4
5
6
7 Panel
8 Panel-mount screws
9 Plug
10 Modules fitted with crimp contacts
11 Accessory in 2 halves
12 Chimneys
Modules fitted with PCB contacts
Receptacle keying component
Fixing panel nuts
Receptacle
Flat gasket
Plug keying component
ELECTRICAL
•W
ithstand Voltage:
At Sea Level:
Service I: 1300 Vrms 50 Hz, module size 24, 23 and 22
Service II: 1500 Vrms 50 Hz, module sizes 20, 16, 12 and 08
Altitude Immersion to 11 hPa (30,000 m/100,000 ft): 1000 Vrms 50 Hz
(all module sizes)
• Insulation Resistance
At Sea Level: ≥5000 MΩ
Altitude Immersion to 11 hPa (30,000 m/100,000 ft): ≥1000 MΩ
• Contact Current Rating (Sealed Connectors):
Size 24: 3 A
Size 23: 5 A
Size 22: 5 A
Size 20: 7.5 A
Size 16: 13 A
Size 12: 23 A
Size 08: 46 A (up to 90 A with specifics contacts)
• Shielding Effectiveness:
Wire-to-Wire Configuration
7
6
1
2
3
4
5
1
6
7
(With conductive shell finish and RFI spring fingers)
Frequency (MHz)
100
200
300
400
800
1
2
3
4
Modules fitted with crimp contacts
Receptacle keying component
Receptacle
Plug keying component
1000
5 Plug
6 Accessory in 2 halves
7 Chimneys
1500
2000
3000
4000
6000
10,000
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 6
Attenuation, Min. (dB)
Aluminum Shell
Composite Shell
80
65
78
60
78
55
77
55
75
45
75
45
59
43
55
40
51
37
48
35
45
33
40
30
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 7
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
RECEPTACLES
RECEPTACLES
STACKABLE RECEPTACLES
FLANGE-MOUNT
RECEPTACLES
DMC-M 42-01: 2 Modules
DMC-M 82-01: 4 Modules
DMC-M 84-01: 4 Modules
Ø 3.2 ±0.05
[0.126 ±0.002]
2 times
19.15
[0.754]
MAX.
19.15
[0.754] 26.8
MAX. [1.055]
MAX.
4
[0.157]
MAX.
26.8
[1.055]
MAX.
5.05 ±0.1
[0.199 ±0.004]
86.1
[3.39]
MAX.
DMC-M 44-01: 2 Modules
55.6
[2.189]
MAX.
88
[3.465]
MAX.
80 ±0.1
[3.15 ±0.004]
49.5 ±0.1
[1.949 ±0.004]
81 ±0.1
[3.189 ±0.004]
50.5 ±0.1
[1.988 ±0.004]
26.8
[1.055]
MAX.
3.3 ±0.1
[0.13 ±0.004]
2 oblong holes
80 ±0.1
[3.15 ±0.004]
3.3 ±0.1
[0.13 ±0.004]
2 oblong holes
DMC-M 83-01: 4 Modules
SHORT FLANGE-MOUNT
RECEPTACLES
DMC-M 43-01: 2 Modules
49.5 ±0.1
[1.949 ±0.004]
50.5 ±0.1
[1.988 ±0.004]
81 ±0.1
[3.189 ±0.004]
SHORT STACKABLE
RECEPTACLES
57.5
[2.264]
MAX.
3.8 ±0.1
[0.15 ±0.004]
3.8 ±0.1
[0.15 ±0.004]
15.25
[0.6]
MAX.
5.05 ±0.1
[0.199 ±0.004]
4
[0.157]
MAX.
DMC-M 85-01: 4 Modules
DMC-M 45-01: 2 Modules
Ø 3.2 ±0.05
[0.126 ±0.002]
2 times
19.15
[0.754]
MAX.
86.1
[3.39]
MAX.
23.1
[0.909]
MAX.
5.05 ±0.1
[0.199 ±0.004]
19.15
[0.754]
MAX.
4
[0.157]
MAX.
55.6
[2.189]
MAX.
88
[3.465]
MAX.
3.8 ±0.1
[0.15 ±0.004]
15.25
[0.6]
MAX.
5.05 ±0.1
[0.199 ±0.004]
49.5 ±0.1
[1.949 ±0.004]
81 ±0.1
[3.189 ±0.004]
50.5 ±0.1
[1.988 ±0.004]
2 oblong holes
4
[0.157]
MAX.
57.5
[2.264]
MAX.
3.8 ±0.1
[0.15 ±0.004]
20.4
[0.803]
MAX.
3.3 ±0.1
[0.13 ±0.004]
80 ±0.1
[3.15 ±0.004]
23.6
[0.929]
MAX.
80 ±0.1
[3.15 ±0.004]
81 ±0.1
[3.189 ±0.004]
3.3 ±0.1
[0.13 ±0.004]
2 oblong holes
49.5 ±0.1
[1.949 ±0.004]
50.5 ±0.1
[1.988 ±0.004]
Note: No accessory can be mounted on the rear of short receptacle shell.
Note: No accessory can be mounted on the rear of short receptacle shell.
DMC-MD shielded versions are delivered with a conductive flat gasket (part no. 108-0019-00 A1142 for 4-module receptacles and 108-0019-01 A1142
for 2-module receptacles). A sealing flat gasket (part no. 108-0019-00 for 4-module receptacles and 108-0019-01 for 2-module receptacles) is also
available but not supplied with receptacles.
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 8
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 9
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
RECEPTACLES
RECEPTACLES
TE PART NUMBERING SYSTEM
DMC-MD
84 B
3 5 W 01
****
CONNECTOR TYPE
DMC-M Standard
DMC-MD Shielded
PLATING/FINISH (Optional)
Aluminum Alloy Shell
F Black Nickel
W Olive Drab Cadmium
Composite Shell
M Nickel (EN4165*0A4** Only)
J Olive Drab Cadmium (EN4165*0A4** Only)
HOUSING TYPE
0 Receptacle Housing
7 Flange-Mount Receptacle Housing
SERIES
A Series 2
B Series 3 (Consult TE)
SHELL DELIVERY CONFIGURATION (Optional)
Omit for Standard Keying Component Not Mounted
A Without Keying Component
9 and 10
PAGES
B With
Keying Component Coded, Mounted or Not Mounted
COMPOSITION
2 2 Modules
4 4 Modules
KEYING
2 3COMPONENT TYPE (Optional: B Configuration Only)
Keying Component Orientation
01 Type4 0 (Black)
1 Type 1 (Purple)
Viewed from front face of plug housing
Largest keyway indicates orientation
2 Type 2 (Yellow)
5 3 (Green)
36 Type
4 Type 4 (Blue)
5 Type 5 (Orange)
6 Type 6 (White)
PAGES 9 and 10
KEYING COMPONENT TYPE
A 2 Standard
Keying Component (Black)
3
4
Keying
Component
Orientation
01 Without
Keying
Component
1 Type 1 (Purple)
Viewed from front face of plug housing
2 Type 2 (Yellow)
Largest keyway indicates orientation
5 3 (Green)
36 Type
4 Type 4 (Blue)
5 Type 5 (Orange)
6 Type 6 (White)
KEYING COMPONENT ORIENTATION IN THE RECEPTACLE (Optional)
Omit - Not mounted
PAGES
1,
2, 3,154,and
5,16
6
3
2
1
KEYING COMPONENT ORIENTATION IN THE RECEPTACLE
0 Not mounted
PAGES
1,
2, 3,154,and
5,16
6
Keying Component Orientation
Viewed from front face of receptacle housing
Largest keyway indicates orientation
5
EN4165 W 7 A 4 3 5
CONNECTOR TYPE
EN4165
HOUSING TYPE
Two-Module Receptacle
42 Standard
43 Short
44 Flange Mount Standard
45 Flange Mount Short
Four-Module Receptacle
82 Standard
83 Short
84 Flange Mount Standard
85 Flange Mount Short
4
EN4165 PART NUMBERING SYSTEM
4
3
2
1
Keying Component Orientation
Viewed from front face of receptacle housing
Largest keyway indicates orientation
6
PLATING/FINISH (Optional)
Aluminum Alloy Shell
Omit - Black Nickel
W Olive Drab Cadmium
Composite Shell
M Nickel (Shell Types 82 and 83 Only)
J Olive Drab Cadmium (Shell Types 82 and 83 Only)
5
6
ISSUE
01
MODIFICATIONS (Optional)
A1064 Bright Nickel Finish
Consult TE for additional modifications
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 10
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 11
STANDARD PLATE
SHORT PLATE
3.7 ±1
[0.146
±0.039]
CD9
732-8021-01 B
3.5 ±1
[0.138
±0.039]
9.2 ±1
[0.362
±0.039]
A
A
16
[0.630]
16
[0.630]
8.85
[.348]
5.15
[0.283]
01
98.2
[3.866]
No. of Rows
13
12
10
8
6
4
3
2
Version
1044
0964
0804
0644
0484
0324
0244
0164
Dim A
232.2
(9.142)
216.2
(8.512)
184.2
(7.252)
152.2
(5.992)
120.2
(4.732)
68.6
(2.701)
52.6
(2.071)
36.6
(1.437)
Violet
03
Yellow
04
Green
05
06
Blue
Orange
03
04
10
Standard
White
Lock nut
Unsealed EN4165-Compliant Keying
Dimensions are mm (inches)
TE PART NUMBERING SYSTEM DMC-MD 0484 A W 01 A
Type
01
02
TE (Standard)
732-8021-01 B
732-8021-02 B
EN4165
EN4165R01
EN4165R02
05
06
732-8021-03 B 732-8021-04 B 732-8021-05 B 732-8021-06 B
EN4165R03
EN4165R04
EN4165R05
EN4165R06
10
732-8021-10 B
EN4165R10
The assembly coupling mechanism requires the use of the tool part no. 057-0590-80. It is delivered with a removable lock nut
(coupling torque 0.15 ±0.02 daN.m (13.3 ±6.1 in. lbf.]).
CONNECTOR TYPE
DMC-M Standard
DMC-MD Shielded (Includes Conductive Gasket)
SIZE/CAPACITY
1044 52 modules (13 rows)
0964 48 modules (12 rows)
0804 40 modules (10 rows)
0644 32 modules (8 rows)
0484 24 modules (6 rows)
0324 16 modules (4 rows)
0244 12 modules (3 rows)
0164 8 modules (2 rows)
Consult TE for other sizes
Sealed Keying
CD9
732-8021-10 B
KEYING COMPONENT (Optional)
Omit - With Keying Component
A Without Keying Component
PLATING/FINISH (Optional)
Aluminum Alloy Shell
Omit - Black Nickel
W Olive Drab Cadmium
ISSUE
01
Type
01
02
03
04
05
06
10
TE (Sealed)
732-8174-01
732-8174-02
732-8174-03
732-8174-04
732-8174-05
732-8174-06
732-8174-10
O-Ring
TE (Standard)TE (Standard)
EN4165
EN4165
TYPE (Optional)
Omit - Standard Plate
A Short Plate (No Backshell Mount)
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
02
CD9
732-8174-10
98.2
[3.866]
CD9
732-8021-10 B
5.15
[0.283]
8.85
[.348]
CD9
732-8174-10
3.5 ±1
[0.138
±0.039]
CD9
732-8021-10 B
DMC-M receptacles use keying components to allow 6 mating
possibilities. An additional 6 keying orientations are possible
providing a total of 36 keying options thereby preventing connector
misalignment and mismating. Keying is especially useful for rack and
multiconnector applications. The keys are provided in sealed and
unsealed versions.
CD9
732-8021-06 B
These multi-receptacle plates receive 4-module rack and panel plugs or free plugs.
No accessory can be mounted on the rear of the lightweight multi-receptacle versions.
CD9
732-8021-05 B
RECEPTACLE KEYING
CD9
732-8021-04 B
MULTI-RECEPTACLE PLATES
CD9
732-8021-03 B
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
CD9
732-8021-02 B
DEUTSCH DMC-M Series Connectors
PAGE 12
O-Ring
TE (Sealed) TE (Sealed)
(Not EN4165)(Not EN4165)
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 13
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
PLUGS
PLUGS
FREE PLUGS
DMC-M 80-01: 4 Modules
REVERSE RACK AND
PANEL PLUGS
DMC-M 40-01: 2 Modules
75.1
[2.957]
MAX.
DMC-M 89-01: 4 Modules
44.60
[1.756]
MAX.
15.1
[0.594]
MAX.
DMC-M
3.05 [0.594] Width across flats
Hexagon socket
1.3
[0.051]
MAX.
D
CD9
89-01
C
B
88
[3.465]
MAX.
6.7
[0.264]
MAX.
6
DMC-M 88-01: 4 Modules
28.1
[1.106]
MAX.
5
CD9
6.5
[0.256]
MAX.
6.5
[0.256]
MAX.
DMC-M 49-01
B
A
M3
A
34.7
[1.366]
MAX.
57.5
[2.264]
MAX.
1 2 34
6
5
See page 40 for panel cutouts.
See page 40 for panel cutouts.
The receptacle/plug coupling is done with the tool 057-0592-80 or a standard Allen wrench (coupling torque 0.1 ±0.03 daN.m [8.8 ±2.6 in. lbf.]).
RACK AND PANEL PLUGS
28.1
[1.106]
MAX.
34.7
[1.366]
MAX.
28.1
[1.106]
MAX.
1 2 34
Ø 5.2
[0.205]
MAX.
DMC-M 49-01: 2 Modules
DMC-M 48-01: 2 Modules
M3
91
[3.583]
MAX.
60.5
[2.382]
MAX.
15.1
[0.594]
MAX.
28.1
[1.106]
MAX.
30
[1.181]
MAX.
6
[0.236]
MAX.
2.1
[0.083]
MAX.
See page 40 for panel cutouts.
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 14
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 15
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
PLUGS
PLUGS
TE PART NUMBERING SYSTEM
DMC-MD
89 B
3 5 W 01
****
CONNECTOR TYPE
DMC-M Standard
DMC-MD Shielded
PLATING/FINISH)
Aluminum Alloy Shell
F Black Nickel
W Olive Drab Cadmium
Composite Shell
M Nickel (EN4165*6A4** Only)
J Olive Drab Cadmium (EN4165*6A4** Only)
HOUSING TYPE
6 Free Plug
9 Rack and Panel Plug
SHELL DELIVERY CONFIGURATION (Optional)
Omit for Standard Keying Component Not Mounted
A Without Keying Component
B With Keying Component Coded, Mounted or Not Mounted
SERIES
A Series 2
B Series 3 (Consult TE)
SIZE
2 2 Modules
4 4 Modules
KEYING COMPONENT TYPE (Optional: B Configuration Only)
0 Type 0 (Black)
1 Type 1 (Purple)
2 Type 2 (Yellow)
3 Type 3 (Green)
4 Type 4 (Blue)
5 Type 5 (Orange)
6 Type 6 (White)
RACK AND PANEL ORIENTATION (Optional)
Omit - Standard
R Reversed
KEYING COMPONENT TYPE (B Configuration Only)
A Standard Keying Component (Black)
0 Without Keying Component
1 Type 1 (Purple)
2 Type 2 (Yellow)
3 Type 3 (Green)
4 Type 4 (Blue)
5 Type 5 (Orange)
6 Type 6 (White)
KEYING COMPONENT ORIENTATION IN THE RECEPTACLE (Optional)
Omit - Not Mounted
10 6
PAGES
1, 2, 3,9 and
4, 5,
2
6
3
4
5
Keying Component Orientation
Viewed from front face of plug housing
Largest keyway indicates orientation
KEYING COMPONENT ORIENTATION IN THE RECEPTACLE
0 Not Mounted
10 6
PAGES
1, 2, 3,9 and
4, 5,
PLATING/FINISH (Optional)
Aluminum Alloy Shell
Omit - Black Nickel
W Olive Drab Cadmium
Composite Shell
PAGES
15 and
16
M
Nickel
(Shell
Type 80 Only)
J 3Olive
Drab
Cadmium
(Shell Type 80 Only)
2
4
ISSUE
01
1
EN4165 W 9 A 4 R 3 5
CONNECTOR TYPE
EN4165
HOUSING TYPE
Two-Module Receptacle
40 Free Plug
48 Rack and Panel Plug
49 Reversed Rack and Panel Plug
Four-Module Receptacle
80 Free Plug
88 Rack and Panel Plug
89 Reversed Rack and Panel Plug
1
EN4165 PART NUMBERING SYSTEM
1
2
6
3
4
5
Keying Component Orientation
Viewed from front face of plug housing
Largest keyway indicates orientation
Keying Component Orientation
Viewed from front face of receptacle housing
Largest keyway indicates orientation
MODIFICATIONS (Optional)
5
6
A1064 Bright Nickel Finish
Consult TE for additional modifications
PAGES 15 and 16
4
3
2
1
Keying Component Orientation
Viewed from front face of receptacle housing
Largest keyway indicates orientation
5
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 16
6
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 17
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
PLUG KEYING
MODULES
DMC-M plugs use an optional keying component to allow 6 mating
possibilities. An additional 6 keying orientations are possible
providing a total of 36 keying options thereby preventing connector
misalignment and mismating. Keying is especially useful for rack and
multiconnector applications.
ELECTRICAL MODULES / AS39029/57 AND /58 AND EN3155 CONTACT COMPLIANT
02
01
Violet
03
Yellow
04
Green
05
Blue
06
10
Orange
White
Socket Contacts
Configuration
30-23
30 Contacts, Size 23
DMC-MR 30-23 AN
DMC-MR 30-23 BN
20-22
20 Contacts, Size 22
DMC-M 20-22 AN
BACI10BC2022PNB
EN4165A20-221NA
DMC-M 20-22 BN
BACI10BC2022SNB
EN4165A20-221NB
20-22*
20 Contacts, Size 22
DMC-MA 20-22 AN
EN4165A20A221NA
DMC-MA 20-22 BN
EN4165A20A221NB
12-20
12 Contacts, Size 20
DMC-M 12-20 AN
BACI10BC1220PNB
EN4165A12-201NA
DMC-M 12-20 BN
BACI10BC1220SNB
EN4165A12-201NB
08-16
8 Contacts, Size 16
DMC-M 08-16 AN
BACI10BC0816PNB
EN4165A08-161NA
DMC-M 08-16 BN
BACI10BC0816SNB
EN4165A08-161NB
04-12
4 Contacts, Size 12
DMC-M 04-12 AN
EN4165A04-121NA
DMC-M 04-12 BN
EN4165A04-121NB
01-08
1 Contact, Size 08
DMC-M 01-08 AN
EN4165A01-081NA
DMC-M 01-08 BN
EN4165A01-081NB
99-01
6 Contacts, Size 16
5 Contacts, Size 22
DMC-M 99-01 AN
BACI10BC1622PNB
EN4165A99-011NA
DMC-M 99-01 BN
BACI10BC1622SNB
EN4165A99-011NB
99-01*
6 Contacts, Size 16
5 Contacts, Size 22
DMC-MA 99-01 AN
EN4165A99A011NA
DMC-MA 99-01 BN
EN4165A99A011NB
99-06
8 Contacts, Size 22
2 Contacts, Size 12
DMC-M 99-06 AN
BACI10BC1001PNB
DMC-M 99-06 BN
BACI10BC1001SNB
99-10
8 Contacts, Size 20
2 Contacts, Size 16
DMC-M 99-10 AN
EN4165A99-101NA
DMC-M 99-10 BN
EN4165A99-101NB
View
Part No.
View
Part No.
CD9
732-8020-10
CD9
732-8020-06
CD9
732-8020-05
CD9
732-8020-04
CD9
732-8020-03
CD9
732-8020-02
CD9
732-8020-01
The assembly of these keys is toolless. Once clipped into their cavities,
keys must be broken to be removed.
Pin Contacts
Arrangement
Standard
Type
01
02
03
04
05
06
10
TE
732-8020-01
732-8020-02
732-8020-03
732-8020-04
732-8020-05
732-8020-06
732-8020-10
EN4165
EN4165P01
EN4165P02
EN4165P03
EN4165P04
EN4165P05
EN4165P06
EN4165P10
ELECTRICAL MODULES / BACC47 CONTACT COMPLIANT
Pin Contacts
Configuration
99-10
8 Size 20 Contacts
2 Size 16 Contacts
DMC-MB 99-10 AN
BACI10BC0910PNB
DMC-MB 99-10 BN
BACI10BC0910SNB
12-20
12 Size 20 Contacts
DMC-MB 12-20 AN
BACI10BC1220APNB
DMC-MB 12-20 BN
BACI10BC1220ASNB
*DMC-MA connector modules are compatible
View
with aluminium cable contacts and with
EN3155-070 / 071 size 22 contacts (for copper cable)
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 18
Socket Contacts
Arrangement
Part No.
Aluminium cable technology possible
with size 22 contacts
View
Part No.
DEUTSCH Part Numbers (DMC-M)
BACI10BC Part Numbers
EN4165 Part Numbers
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 19
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
MODULES
MODULES
GROUNDING MODULES
FIBER OPTIC AND HYBRID MODULES
Pin Contacts
Configuration
Module Part No.
Alignment Sleeve
Arrangement
Configuration
08-16
8 Size 16 Contacts
DMC-M 08-16 AN-G
EN4165A08G161NA
6 MC5
Termini
458235
458238
458237-C (Ceramic)
458237-M (Metal)
04-12
4 Size 12 Contacts
DMC-M 04-12 AN-G
EN4165A04G121NA
1 MT Ferrule
(12 or 24 Fibers)
DMC-M01-MC6N
DMC-M01-MC6N
Not required
01-08
1 Size 08 Contact
DMC-M 01-08 AN-G
EN4165A02G081NA
2 ARINC 801 Termini
5 Contacts, Size 16
2 Contacts, Size 22
459736
459736-P (With Contacts)
459823 (Right Angle)
459737 (Ceramic Sleeve)
459737-S (Ceramic Sleeve with Contacts)
459737-M (Metal Sleeve)
459737-M-S (Metal Sleeve with Contacts)
Included with
socket module
View
Part No.
BLANKING MODULES
Configuration
View
Blanking Module
SHUNT MODULES
Configuration
Arrangement
Configuration
DMC-M 00-00 PN
EN4165-1N
22-05
20 Contacts, Size 22
5 Shunts 4 Ways
22-07
20 Contacts, Size 22
3 Shunts 4 Ways
4 Shunts 2 Ways
DMC-M 22-07 BN
EN4165A2AY221NB
22-10
20 Contacts, Size 22
10 Shunts 2 Ways
DMC-M 22-10 BN
EN4165A2BY221NB
16-02
6 Contacts, Size 16
2 Contacts, Size 22
8 Contacts, Size 24
99-02
View
DMC-M 22-05 BN
EN4165A20Y221NB
Pin Contacts
Part No.
SERIES 2 MODULES
L2 MAX.
L1 MAX.
14.1
[0.555]
14.1
[0.555]
Socket Contacts
Part No.
View
Part No.
2226454-1
DMC-M 16-02 AN
8 Contacts, Size 22
3 Contacts, Size 20
Socket
Part No.
Distribution shunt modules use dedicated contacts based on
standard AS39029. The shunt modules can only be mated with
DMC-M 20-22 AN or DMC-MA 20-22 AN modules.
View
Part No.
Module Dimensions (Except Fiber Optic Modules)
Part No.
HIGH-SPEED ETHERNET MODULES
Arrangement
DMC-M 01-08 BN-G
EN4165A02G081NB
Pin
2226455-1
DMC-M 16-02 BN
DMC-M 99-02 AN
DMC-M 99-02 BN
15
[0.591]
15
[0.591]
Modules for Contact Size
L1 (Short)
L2 (Long)
24, 23, 22, 20, 16, 12
16.46 (0.648)
22.40 (0.882)
08
18.70 (0.736)
33.20 (1.307)
Module extraction is done with the tool part no. 057-0289-00 A or B.
The module insertion into the plug or receptacle is done manually.
99-03
8 Contacts, Size 20
8 Contacts, Size 24
DMC-M 99-03 AN
DMC-M 99-03 BN
99-04
6 Contacts, Size 20
2 Contacts, Size 22
8 Contacts, Size 24
DMC-M 99-04 AN
DMC-M 99-04 BN
Polarization Keys
(Module viewed from front face)
N
A
B
C
D
QUADRAX MODULES
Arrangement
Configuration
01-09
1 Quadrax Contact
Pin Contacts
View
Socket Contacts
Part No.
View
DMC-M 01-08 AN-GQ
EN4165A01Q281NA
Part No.
DMC-M 01-08 BN-GQ
EN4165A01Q281NB
DEUTSCH Part Numbers (DMC-M)
BACI10BC Part Numbers
EN4165 Part Numbers
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 20
N
N
N
N
N
Each module can have a specific polarization key A, B, C or D. The polarized modules must
be installed in a similarly polarized shell cavity. N-keyed modules will fit into all shells.
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 21
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
MODULES
MODULES
TE PART NUMBERING SYSTEM
DMC-M 20-22 A N E
TE PART NUMBERING SYSTEM
Standard Modules
Aluminum Cable Compliant Modules
CONNECTOR TYPE
DMC-M
CONNECTOR TYPE
DMC-MA
ARRANGEMENT
See Pages 19 - 21
ARRANGEMENT
20-22
99-01
CONTACTS*
P Standard Male Contact
S Standard Female Contact
A Without Male Contact
B Without Female Contact
C Male Contact, Enlarged Crimp Barrel
D Female Contacts, Enlarged Crimp Barrel
CONTACTS
A Without Male Contact
B Without Female Contact
POLARIZATION
N, A, B, C, D
POLARIZATION
N, A, B, C, D
EN4165 PART NUMBERING SYSTEM
SEALING (Optional)
Omit - Standard (No Sealing)
E Sealed
EN4165 PART NUMBERING SYSTEM
DMC-MA 20-22 A N
EN4165 A 20A22
1
N A
Aluminum Cable Compliant Modules
CONNECTOR TYPE
EN4165
EN4165 A 20-22
2 N A
Standard Modules
MODULE SERIES
A Series 2
B Series 3 (Consult TE)
ARRANGEMENT
20A22
99A01
CONNECTOR TYPE
EN4165
MODULE SERIES
A Series 2
B Series 3 (Consult TE)
SEALING
1 Unsealed
POLARIZATION
N, A, B, C, D
ARRANGEMENT
See Pages 19 - 21
CONTACTS
A Without Male Contact
B Without Female Contact
SEALING
1 Unsealed
2 Sealed
POLARIZATION
N, A, B, C, D
CONTACTS*
F Standard Female Contact
M Standard Male Contact
A Without Male Contact
B Without Female Contact
C Male Contact, Enlarged Crimp Barrel
D Female Contacts, Enlarged Crimp Barrel
*Standard contacts compliant with AS39029 and EN3155
Note: DMC-MA connector modules are compatible with aluminum cable contacts and with EN4165-070/071 size 22 contacts for copper cable.
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 22
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 23
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
MODULES
MODULES
TE PART NUMBERING SYSTEM
DMC-M 01-08 B N - G W
TE PART NUMBERING SYSTEM
Grounding Modules
Quadrax Modules
CONNECTOR TYPE
DMC-M
CONNECTOR TYPE
DMC-M
MODULE TYPE
01-08
04-12
08-16
ARRANGEMENT
01-08 Only
CONTACT TYPE
A Without Male Contact
B Without Female Contact
CONTACTS
P Standard Male Contact
S Standard Female Contact
A Without Male Contact
B Without Female Contact
POLARIZATION
N, A, B, C, D
GROUNDING
G
POLARIZATION
N, A, B, C, D
QUADRAX
Q
GROUNDING
G
PLATING/FINISH (Optional)
Aluminum Alloy
Omit - Black Nickel
W Olive Drab Cadmium
PLATING/FINISH (Optional)
Aluminum Alloy
Omit - Black Nickel
W Olive Drab Cadmium
EN4165 PART NUMBERING SYSTEM
EN4165 PART NUMBERING SYSTEM
DMC-M 01-08 B N – G Q W
EN4165 A 01G 0 8 2 N B
EN4165 A 01Q28 2 N B
Quadrax Modules
FAMILY
EN4165
Grounding Modules
CONNECTOR TYPE
EN4165
MODULE SERIES
A Series 2
B Series 3 (Consult TE)
MODULE SERIES
A Series 2
B Series 3 (Consult TE)
ARRANGEMENTS
1Q28
ARRANGEMENT
01G08
04G12
08G16
SEALING
1 Unsealed
2 Sealed
POLARIZATION
N, A, B, C, D
SEALING
1 Unsealed
2 Sealed
CONTACTS
A Without Male Contact
B Without Female Contact
POLARIZATION
N, A, B, C, D
CONTACTS
F Standard Female Contact
M Standard Male Contact
A Without Male Contact
B Without Female Contact
C Male Contact, Enlarged Crimp Barrel
D Female Contacts, Enlarged Crimp Barrel
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 24
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 25
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
MODULES
ACCESSORIES
TE PART NUMBERING SYSTEM
SHIELDED ACCESSORY BODIES
DMC-M 22-05 B N
Shunt Modules
CONNECTOR TYPE
DMC-M
ARRANGEMENTS
22-05 5 Shunts 4 Ways
22-07 3 Shunts 4 Ways and 4 Shunts 2 Ways
22-10 10 Shunts 2 Ways
732-8054-14 A: 2 Modules
75
[2.953]
MAX.
44.50
[1.752]
MAX.
15.2
[0.598]
MAX.
4.1
[0.161]
MAX.
CONTACT TYPE
S Female Contact
B Without Female Contact
POLARIZATION
N, A, B, C, D
EN4165 PART NUMBERING SYSTEM
732-8054-10 A: 4 Modules
27.2
[1.071]
MAX.
EN4165 A
2 0Y22
1
N B
Shunt Modules
32.2
[1.268]
MAX.
15.2
[0.598]
MAX.
4.1
[0.161]
MAX.
30.1
[1.185]
MAX.
32.2
[1.268]
MAX.
14.2
[0.559]
MAX.
14.2
[0.559]
MAX.
Ø 11.05
[0.435]
MAX.
FAMILY
EN4165
MODULE SERIES
A Series 2
B Series 3 (Consult TE)
TE PART NUMBERING SYSTEM
ARRANGEMENTS
20Y22 5 Shunts 4 Ways
2AY22 3 Shunts 4 Ways and 4 Shunts 2 Ways
2BY22 10 Shunts 2 Ways
Ø 11.05
[0.435]
MAX.
732 – 8052 – 00 W A
FAMILY
732
TYPE (Used With)
8052 Free Plug
8053 Rack and Panel Plug
8054 Receptacle
SEALING
1 Unsealed
POLARIZATION
N, A, B, C, D
SHELL
Two-Module Accessory
01 2 Round Chimneys
14 No Chimney
Four-Module Accessory
00 4 Round Chimneys
10 No Chimney
CONTACT TYPE
B Without Female Contact
F With Female Contact
PLATING/FINISH (Optional)
Aluminum Alloy Body
Omit - Black Nickel
W Olive Drab Cadmium
Composite Body
M Nickel (For Shell Types 00 and 10 Only)
J Olive Drab Cadmium (For Shell Types 00 and 10 Only)
ISSUE
A
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 26
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 27
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
ACCESSORIES
ACCESSORIES
EN PART NUMBERING SYSTEM
NONSHIELDED CABLE CLAMPS
EN4165 F 14 P 4
FAMILY
EN4165
PLATING/FINISH
Aluminum Alloy Body
F Black Nickel
W Olive Drab Cadmium
Composite Body
M Nickel (For Shell Types P4 and R4 Only)
J Olive Drab Cadmium (For Shell Types P4 and R4 Only)
732-8002-00: 4 Modules
732-8002-01: 2 Modules
75
[2.953]
MAX.
44.5
[1.752]
MAX.
6
[0.236]
MAX.
15.2
[0.598]
MAX.
4.1
[0.161]
MAX.
BODY
14 Shielded Accessory Body
TYPE (Used With)
P Free Plug
R Receptacle and Rack and Panel Plug
24
[0.945]
MAX.
27.2
[1.071]
MAX.
SHELL
2 2 Modules
4 4 Modules
Ø 12
[0.472]
MAX.
33
[1.299]
MAX.
TE PART NUMBERING SYSTEM
732 – 8002 – 00 W
FAMILY
732
MATERIAL
8002 Metal
8040 PEI Plastic
SIZE
00 4 Module (Metal)
00A 4 Module (PEI)
01 2 Module (Metal and PEI)
PLATING/FINISH (Optional: Metal Clamps Only)
Omit - Black Nickel
W Olive Drab Cadmium
EN PART NUMBERING SYSTEM
EN4165 F 13 A 4
FAMILY
EN4165
PLATING/FINISH
F Black Nickel
W Olive Drab Cadmium
TYPE
13 Cable Clamp
SERIES
A Series 2
B Series 3 (Consult TE)
SIZE
2 2 Modules
4 4 Modules
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 28
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 29
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
ACCESSORIES
ACCESSORIES
732-8052-18
A : Anti-Rotation Round Chimney
CHIMNEYS FOR SHIELDED ACCESSORIES
CHIMNEYS FOR SHIELDED ACCESSORIES
732-8052-12 A: Double Oval Chimney (1 for 2 cavities, for 4-module accessories only)
11.83
[0.466]
MAX.
18.5
[0.711]
MAX.
Ø10.55
[0.415]
MAX.
Ø 9.45
[0.372]
MIN.
26.6
[1.047]
MAX.
23.7
[0.933]
MAX.
15.5 ±0.3
[0.61 ±0.012]
732-8052-13 A:
Blank Chimney (1 per cavity)
Ø 11.05
[0.435]
MAX.
13.1
[0.516]
MAX.
1.1
[0.043]
MAX.
9.1
[0.358]
MAX.
13.1
[0.516]
MAX.
Ø10.55
[0.415]
MAX.
Ø11.05
[0.435]
0.75
[0.030]
13.1
[0.516]
MAX.
9.1
[0.358]
MAX.
CD-9-732-8052-19A
Ø11.05
[0.435]
20
[0.787]
MAX.
18.4
[0.724]
MAX.
1.1
[0.043]
MAX.
Ø9.45
[0.372]
MIN.
Ø14.3
[0.563]
MAX.
1.1
[0.043]
MAX.
24.3
[0.957]
MAX.
Ø9.45
[0.372]
MIN.
14.55
[0.573]
MAX.
732-8052-11 A:
Round Chimney (1 per cavity)
Ø 10.55
[0.412]
MAX.
Ø14.3
[0.563]
MAX.
R = 5.0 ±0.3
[0.197 ±0.012]
1.1
[0.043]
MAX.
11
[0.433]
MAX.
CD9-732-8052-18A
29.3
[1.154]
MAX.
13.1
[0.516]
MAX.
732-8052-19 A
Anti-Rotational Round Chimney with Tie Wrap Option
11
[0.433]
MAX.
8.87
[0.349]
MIN.
9.0 ±0.2
[0.354 ±0.008]
Ø 14.3
[0.563]
MAX.
732-8052-18 A:
Anti-Rotational Round Chimney
732-8052-19 A: Ani-Rotation Round Chimney with
Tie Wrap Option
9.1
[0.358]
MAX.
Ø 14.3
[0.563]
MAX.
18.05
[0.711]
MAX.
1.1
[0.043]
MAX.
TE PART NUMBERING SYSTEM
732-8052 – 11 W A
FAMILY
732-8052
5.0
[0.197]
MAX.
TYPE
11 Round Chimney
12 Double Oval Chimney
13 Blank Chimney
18 Anti-Rotational Round Chimney
19 Anti-Rotational Round Chimney with Tie Wrap Option
PLATING/FINISH
Omit for Black Nickel
W Olive Drab Cadmium
Ø 9.45
[0.372]
MIN.
ISSUE
A
EN PART NUMBERING SYSTEM
EN4165 16 F
STANDARD
EN4165
TYPE
15
15A
16
17
Round Chimney
Anti-Rotational Round Chimney with Tie Wrap Option
Double Oval Chimney
Blank Chimney
PLATING/FINISH
F Black Nickel
W Olive Drab Cadmium
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 30
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 31
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
MASSES
MASSES
Receptacles
Plug Keying Component
Type
Nickel Finish
TE Part No.
Olive Drab Cadmium Finish
EN Part No.
TE Part No.
EN Part No.
Mass,
Max. (g)
Page
8
2-Module Receptacles
Standard
DMC-M 42 A 01
EN4165F0A200
DMC-M 42 AW 01
EN4165W0A200
17
Short
DMC-M 43 A 01
—
DMC-M 43 AW 01
—
15
8
Flange Mount
DMC-M 44 A 01
EN4165F7A200
DMC-M 44 AW 01
EN4165W7A200
22
9
Short, Flange Mount
DMC-M 45 A 01
—
DMC-M 45 AW 01
—
21
9
19
8
DMC-M 01-08 B*
EN4165A01-081*B
4.4
19
Male
DMC-M 04-12 A*
EN4165A04-121*A
2.8
19
19
DMC-MD 82 AJ 01
EN4165J0A400
15
8
Short (Composite)
DMC-MD 83 AM 01
—
DMC-MD 83 AJ 01
—
14
8
Flange Mount
DMC-M 84 A 01
EN4165F7A400
DMC-M 84 AW 01
EN4165W7A400
28
9
Short, Flange Mount
DMC-M 85 A 01
—
DMC-M 85 AW 01
—
27
9
Multi-Receptacle Housings
8
12
16
24
32
40
48
52
Standard
DMC-M 0164-01
98
12
Lightweight
DMC-M 0164-01 A
55
12
Standard
DMC-M 0244-01
127
Male
Female
EN4165M0A400
Page
—
20
DMC-MD 82 AM 01
Mass (g)
00-00 (Blank)
2.9
Standard (Composite)
TE Part No.
TE Part No.
3.0
8
Type
Contact Type
EN4165-1N
22
Size (No. of Modules)
Insert
Modules
EN4165A01-081*A
EN4165W0A400
20
18
DMC-M 01-08 A*
DMC-M 82 AW 01
—
Page
0.7
DMC-M 00-00 PN
EN4165F0A400
DMC-M 83 AW 01
Mass, Max. (g)
EN4165P**
Page
DMC-M 82 A 01
—
EN Part No.
Mass, Max. (g)
Standard (Aluminum)
DMC-M 83 A 01
TE Part No.
732-8020-**
EN Part No.
4-Module Receptacles
Short (Aluminum)
Type
Keying
Standard Modules
01-08
04-12
08-16
12-20
12
19
Male
DMC-M 99-01 A*
EN4165A99-011*A
2.4
19
Female
DMC-M 99-01 B*
EN4165A99-011*B
3.2
19
Male
DMC-M 99-06 A*
??
19
Female
DMC-M 99-06 B*
??
19
Male
DMC-M 99-10 A*
EN4165A99-101*A
3.2
19
DMC-M 99-10 B*
EN4165A99-101*B
4.2
19
DMC-M 0484-01
214
12
Lightweight
DMC-M 0484-01 A
131
12
Standard
DMC-M 0644-01
273
12
Lightweight
DMC-M 0644-01 A
171
12
Standard
DMC-M 0804-01
331
12
Lightweight
DMC-M 0804-01 A
211
12
Standard
DMC-M 0964-01
390
12
Lightweight
DMC-M 0964-01 A
251
12
Standard
DMC-M 1044-01
419
12
Lightweight
DMC-M 1044-01 A
271
12
99-01
99-06
99-10
30-23
20-22
Mass,
Max. (g)
Page
2-Module Plugs
Free Hanging (Aluminum)
DMC-M 40 A 01
EN4165F6A200
DMC-M 40 AW 01
EN4165W6A200
22
14
Rack and Panel
DMC-M 48 A 01
EN4165F9A200
DMC-M 48 AW 01
EN4165W9A200
33
14
Reversed Rack and Panel
DMC-M 49 A 01
EN4165F9A2R00
DMC-M 49 AW 01
EN4165W9A2R00
33
15
4-Module Plugs
Nickel Finish
04-12
08-16
Olive Drab Cadmium Finish
EN Part No.
TE Part No.
EN Part No.
Mass,
Max. (g)
Page
Free Hanging (Aluminum)
DMC-M 80 A 01
EN4165F6A400
DMC-M 80 AW 01
EN4165W6A400
22
14
Free Hanging (Composite)
DMC-MD 80 AM
EN4165M6A400
DMC-MD 80 AJ
EN4165J6A400
19
14
Rack and Panel
DMC-M 88 A 01
EN4165F9A400
DMC-M 88 AW 01
EN4165W9A400
38
14
Reversed Rack and Panel
DMC-M 89 A 01
EN4165F9A4R00
DMC-M 89 AW 01
EN4165W9A4R00
38
15
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
—
3.4
19
DMC-MR 30-23 B*
—
2.5
19
19
Male
DMC-MA 20-22 A*
EN4165A20A221*A
2.9
Female
DMC-MA 20-22 B*
EN4165A20A221*B
3.2
19
Male
DMC-MA 99-01 A*
EN4165A99A011*A
2.9
19
Female
DMC-MA 99-01 B*
EN4165A99A011*B
3.7
19
Male
DMC-M 01-08 A*-G*
EN4165A01G081*A
3.6
20
Female
DMC-M 01-08 B*-G*
EN4165A01G081*B
7.5
20
Male
DMC-M 04-12 A*-G*
EN4165A04G121*A
3.8
20
PAGE 32
Female
DMC-M 04-12 B*-G*
EN4165A04G121*B
6.7
20
Male
DMC-M 08-16 A*-G*
EN4165A08G161*A
3.9
20
Female
DMC-M 08-16 B*-G*
EN4165A08G161*B
6.9
20
BACC47 Contact Compliant
99-10
TE Part No.
Type
DMC-MR 30-23 A*
Grounding Modules
01-08
EN Part No.
Male
Female
Aluminum Cable Compatible Modules
Plugs
Olive Drab Cadmium Finish
Female
High-Density Modules
99-01
TE Part No.
19
19
Standard
EN Part No.
3.2
4.1
12
Nickel Finish
EN4165A12-201*A
EN4165A20-221*B
95
TE Part No.
DMC-M 12-20 A*
DMC-M 20-22 B*
20-22
Receptacle Keying Component
Type
Male
Female
DMC-M 0324-01 A
13
19
19
Lightweight
2.5
3.9
3.1
12
EN4165R**
EN4165A08-161*B
4.1
12
732-8021-** B
DMC-M 08-16 B*
EN4165A12-201*B
75
Keying
19
Female
EN4165A20-221*A
156
Page
2.9
DMC-M 12-20 B*
DMC-M 0324-01
Mass, Max. (g)
3.7
EN4165A08-161*A
DMC-M 20-22 A*
DMC-M 0244-01 A
EN Part No.
EN4165A04-121*B
DMC-M 08-16 A*
Male
Standard
TE Part No.
DMC-M 04-12 B*
Male
Female
Lightweight
Type
Female
12-20
Male
DMC-MB 99-10 A*
—
2.9
19
Female
DMC-MB 99-10 B*
—
4.1
19
Male
DMC-MB 12-20 A*
—
2.9
19
Female
DMC-MB 12-20 B*
—
4.1
19
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 33
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
MASSES
MASSES
Modules (continued)
Shielded Accessory Bodies
Insert
Contact Type
TE Part No.
EN Part No.
Mass, Max. (g)
Page
Quadrax Modules
01-08 (Ni)
01-08 (Cd)
EN4165A01Q281*A
3.5
20
DMC-M 01-08 B*-GQ
EN4165A01Q281*B
7.4
20
Free Hanging
732-8052-14 A
732-8052-14 WA
EN4165W14P2
25
27
Rack and Panel
732-8053-14 A
—
732-8053-14
23
27
—
3.5
20
DMC-M 01-08 B*-GQW
—
7.4
20
Free Hanging (Aluminum)
732-8052-10 A
EN4165F14P4
732-8052-10 WA
EN4165W14P4
34
27
Female
DMC-M 22-05 B*
EN4165A20Y221*B
3.8
20
Free Hanging (Composite)
732-8052-10 M
EN4165M14P4
732-8052-10 J
EN4165J14P4
26
27
20
Rack and Panel
732-8053-10 A
—
732-8053-10 WA
—
32
27
EN4165W14R2
23
27
EN4165W14R4
32
27
DMC-M 22-07 B*
DMC-M 22-10 B*
EN4165A2AY221*B
EN4165A2BY221*B
3.7
3.7
20
Male
DMC-M 99-02 A*
—
3.6
20
Female
DMC-M 99-02 B*
—
4.4
20
Male
DMC-M 99-03 A*
—
2.5
20
Female
DMC-M 99-03 B*
—
3.35
20
4-Module Plugs
2-Module Receptacles
Standard and Short
Standard and Short
DMC-M 99-04 A*
—
2.9
20
DMC-M 99-04 B*
—
3.4
20
Type
Male
2226454-1 /
DMC-M 16-02 A*
—
2.5
20
2226455-1 /
DMC-M 16-02 B*
—
3.4
20
Optical and Hybrid Modules
Male
458235
—
5.5
21
Female
458238
—
8.9
21
Male
459736-x
—
4.3
21
Female
459739-x
—
5.3
21
Hermaphroditic
DMC-M01-MC6N
—
12.5
21
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 34
EN4165F14R2
732-8054-14 WA
732-8054-10 A
EN4165F14R4
732-8054-10 WA
Non-Shielded Cable Clamps
Male
Female
732-8054-14 A
4-Module Receptacles
Female
16-02
MC6
EN4165F14P2
DMC-M 01-08 A*-GQW
High-Speed Modules
T47 Hybrid
Page
Male
Female
MC5
Mass,
Max. (g)
Female
20-22 (10 Shunts 2 Ways)
99-04
EN Part No.
2-Module Plugs
DMC-M 01-08 A*-GQ
Female
99-03
Olive Drab Cadmium Finish
TE Part No.
EN Part No.
Male
20-22 (3 Shunts 4 Ways and
4 Shunts 2 Ways)
99-02
Nickel Finish
TE Part No.
Female
Shunt Modules
20-22 (5 Shunts 4 Ways)
Type
Nickel Finish
Olive Drab Cadmium Finish
TE Part No.
EN Part No.
TE Part No.
EN Part No.
Mass,
Max. (g)
Page
4-Module Shells
732-8002-00
EN4165F13A4
732-8002-00 W
EN4165W13A4
34
29
2-Module Shells
732-8002-01
EN4165F13A2
732-8002-01 W
EN4165W13A2
22
29
Mass,
Max. (g)
Page
Chimneys for Shielded Accessories
Type
Nickel Finish
TE Part No.
Olive Drab Cadmium Finish
EN Part No.
TE Part No.
EN Part No.
Round
732-8052-11 A
EN4165F15
732-8052-11 WA
EN4165W15
1.5
30
Double Oval
732-8052-12 A
EN4165F16
732-8052-12 WA
EN4165W16
3.5
30
30
Blank
732-8052-13 A
EN4165F17
732-8052-13 WA
EN4165W17
2
Anti-Rotation Round
732-8052-18 A
—
732-8052-18 WA
—
1.55
31
Anti-Rotation Round/Tie Wrap
732-8052-19 A
EN4165F15A
732-8052-19 WA
EN4165W15A
1.7
30
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 35
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
CONTACTS
CONTACTS
ELECTRICAL CONTACTS
Color Coding
Pin: AS39029/58
Socket: AS39029/57
1 2 3
1 2
3 2 1
2 1
Inspection hole
Size
24/24
23/22
22/22
22/20
20/20
20/18
16/16
16/14
12/12
12/10
08 (Power)
08 (Power)
Microcoax
08 (Coax)
08
22 (Shunt)
TOOLING
Color Coding
Pin and Socket: EN3155
Inspection hole
Part No.
Color Bands
Type
724-0001-24
Pin
724-0003-24
Socket
—
724-0001-20
Pin
Orange-Blue-Orange
Socket
Orange-Green-Purple
724-1063-20
Pin
724-1064-20
Socket
724-0001-16
Pin
Orange-Blue-Yellow
724-0003-16
Socket
Orange-Green-Gray
724-1063-16
Pin
724-1064-16
Socket
724-0001-12
Pin
Orange-Blue-Green
724-0003-12
Socket
Orange-Green-White
724-1063-12
Pin
—
—
—
724-1064-12
Socket
724-0001-08
Pin
724-0003-08
Socket
182-0001-08
Pin
182-0003-08
Socket
724-0004-16
Pin
Yellow-Red-Yellow
724-0005-16
Socket
Yellow-Orange-Red
182-0048-08
Pin
Socket
724-1272-22
Socket
605837-22
0.15 - 0.4
182-4043-23
182-4042-23
057-0463-12
M22520/2-01
057-0467-32
057-0515-32
M22520/2-09
M22520/2-06
M81969/14-01
26-22
0.15 - 0.40
724-0001-22
724-0003-22
057-0463-12
M22520/2-01
057-0467-32
057-0515-32
M22520/2-09
M22520/2-06
M81969/14-01
Red-Green
24-20
0.25 - 0.60
182-0860-22
182-0862-22
057-0463-12
M22520/2-01
057-0467-32
057-0515-32
M22520/2-09
M22520/2-06
M81969/14-01
Red-Red
24-20
0.25 - 0.60
724-0001-20
724-0003-20
057-0461-11
M22520/1-01
057-0466-21
M22520/1-04
M81969/14-10
Brown-Red
24-18
0.25 - 1.00
724-1063-20
724-1064-20
057-0461-11
M22520/1-01
056-0466-21
M22520/1-04
M81969/14-10
Blue-Blue
20-16
0.60 - 1.20
724-0001-16
724-0003-16
057-0461-11
M22520/1-01
057-0466-21
M22520/1-04
M81969/14-03
White-Blue
20-14
0.60 - 2.00
724-1063-16
724-1064-16
057-0461-11
M22520/1-01
056-0466-21
M22520/1-04
M81969/14-03
Yellow-Yellow
14-12
2.00 - 3.00
724-0001-12
724-0003-12
057-0461-11
M22520/1-01
057-0466-21
M22520/1-04
M81969/14-04
White-Yellow
12-10
3.00 - 5.00
724-1063-12
724-1064-12
057-0461-11
M22520/1-01
056-0466-21
M25520/1-04
—
5.30 - 8.98
724-0001-08
724-0003-08
057-0064-05 A
N/A
057-0065-05 A
N/A
114-008 or
M81969/14-06
182-0001-08
182-0003-08
057-0064-05 A
N/A
057-0065-05 A
N/A
114-008 or
M81969/14-06
724-0004-16
724-0005-16
057-0463-12
(Center Contact)
057-0509-14
(Outer Contact)
N/A
057-0539-32
(Center Contact)
057-0511-34
(Outer Contact)
N/A
M15570-16
Green-Green
724-0003-20
182-0044-08
—
26-22
Orange-Green-Yellow
Pin
057-1030-02
057-1030-01
Green-Purple
Socket
Socket
M22520/2-01
—
724-0003-22
182-0125-08
057-0463-12
0.15 - 0.25
Orange-Blue-Black
182-0126-08
724-0001-24
724-0003-24
26-24
Pin
Pin
Insertion/Extraction
Tool
—
724-0001-22
Socket
Mil Part No.
—
Pin
182-0862-22
Part No.
mm2
Socket
Positioner
Mil Part No.
AWG
182-4043-23
Crimp Tool
Part No.
EN3155
182-4042-23
182-0860-22
Wire Range
AS39029
—
—
08
—
—
08
0.057 - 0.158
Part No.
—
KX 22
—
—
ALPEN A 26 DT
182-0125-08
182-0126-08
N/A
N/A
N/A
N/A
114-008 or
M81969/14-06
—
—
SMA Interface
182-0048-08
182-0044-08
N/A
N/A
N/A
N/A
114-008 or
M81969/14-06
—
—
26-22
724-1272-22
057-0463-12
M22520/2-01
057-0515-32
M22520/2-06
M81969/14-01
0.15 - 0.40
Bold part numbers are standard contacts delivered with modules.
Bold part numbers are standard contacts delivered with modules.
Databus Contacts (Twisted Pair) As Per AS39029
Tooling for Databus Contacts
Cable Type
Single Braid
Double Braid
Part No.
Type
182-0034-03
Pin
182-0035-03
Skt
182-0034-04
Pin
Olive Drab Cadmium
Skt
Color Bands
Brown-Red
Red-Red
Conductor Size, Max.
2 x 0.34 mm2
2 x 0.34 mm2
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
Braid OD, Max.
3.48
3.91
PAGE 36
Cable Type
Sleeve Type
Center Conductor
Ferrule
Single Braid
Thermoplastic and
Silicone
TDB-CY-08
TDB-CT-HEX Mark C
Double Braid
Thermoplastic and
Silicone
TDB-CT-08
TDB-CT-08HEX Mark D
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
Insertion/Extraction Tool
114-008 or
M81969/14-06
PAGE 37
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
FIBER OPTIC TERMINI
FIBER OPTIC TOOL KITS AND TRAINING
MC6 Termini
MC6 12 SM 01 P
FAMILY
MC6
NUMBER OF FIBERS
12
FIBER TYPE
SM Single Mode
MM Multimode
CABLE TYPE
01 Ruggedized Oval Aerospace Multifiber Cable, 3.95 mm x 1.60 mm max. Jacket
02 Round Multifiber Cable, Ø 3.96 mm max. Jacket
FERRULE TYPE
P Male, with Alignment Pins
S Female, without Alignment Pins
FIBER OPTIC TOOL KITS
MC5 Termini
455335
126
01
FAMILY
455335 MC5
We offer tool kits to meet a range of needs, including emergency
field terminations, workshop termination, fusion splicing, and testing
and inspection. Kit can cover a generic range of connectors or
can be tailored to specific products.
FIBER OPTIC TRAINING
Our training equips technicians with best practices for handling
fiber and termination it in a range of TE connectors. Contact TE for
further details.
OPTICAL HOLE DIAMETER
126 126 μm
127 127 μm
CABLE TYPE
00 900 μm buffered fiber
01 2.1 mm cable OD
02 1.8 mm cable OD
03 2.5 mm cable OD
04 2.4 mm cable OD
05 1.2 mm cable OD
ARINC 801 Termini for T47 Modules
459265
126
02
FAMILY
459265 ARINC 801
OPTICAL HOLE DIAMETER
126 126 μm
CABLE TYPE
00 900 μm buffered fiber
02 1.8 mm cable OD
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 38
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 39
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
PANEL CUTOUTS
CONNECTOR TOOLING
Panel Cutouts for Rack and Panel Plugs
TYPES 88, 89
TYPES 48, 49
84.5 ±0.1
[3.327 ±0.004]
54 ±0.1
[2.126 ±0.02]
76.7 ±0.1
[3.02 ±0.004]
46.2 ±0.1
[1.819 ±0.004]
16.7 ±0.1
[0.657 ±0.004]
11.0 ±0.05
[0.433 ±0.002]
Ø 2.15 ±0.05
[0.085 ±0.002]
4 times
Ø 3.2 ±0.05
[0.126 ±0.002]
2 times
33.4
[1.315]
MAX.
Mounting and dismounting of
receptacle keying component.
057-0590-80 / EN4165TC
54.9
[2.161]
MAX.
38.4
[1.512]
MAX.
Mounting of plug keying component
Manual insertion and extraction
7.8
[0.307]
MAX.
Maximum Misalignment between Plug and Receptacle
OZ: ±2 mm (±0.79 in.) OY: ±0.75 mm (±0.030 in.) OX: ±0.75 mm (±0.030 in.)
Insertion tool (only for sealed module)
Long version
057-0699-00 A / EN4165TS
ø: ±1°
Panel Cutouts for Receptacles
TYPES 82, 83, 84, 85
TYPES 42, 43, 44, 45
80.5 ±0.5
[3.169 ±0.02]
50 ±0.5
[1.969 ±0.02]
75.3 ±0.1
[2.965 ±0.004]
44.8 ±0.1
[1.764 ±0.004]
Short version
057-0699-00 B / EN4165TS
Standard allen keys
15.4 ±0.1
[0.606 ±0.004]
M3 or 2 times
Extraction tool
Long version
057-0289-00 A / EN4165TN
Short version
057-0289-00 B / EN4165TN
Coupling torque for panel screw: 0.2 daN.m (17.7 in. lbf) max.
Coupling torque 0.1 daN.m max.
Unmated
Position
Mated
Position
38.4
[1.512]
MAX.
33.4
[1.315]
MAX.
Contact tools
Size 22: M81969/14-01
54.9
[2.161]
MAX.
Size 20: M81969/14-10
Size 16: M81969/14-03
Size 12: M81969/14-04
Size 08: M81969/14-06
7.8
[0.307]
MAX.
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
* Delivered with contacts
PAGE 40
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 41
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
USER MANUAL
USER MANUAL
Contact Crimping
Contact Insertion and Withdrawal
Part Number
Use a crimping tool with the appropriate
pilot stop.
Strip the insulation from the copper wire, with
5 mm maximum strip length. (For aluminum wire,
consult TE.)
Contact Size
M81969/14-01
22
M81969/14-10
20
M81969/14-03
16
M81969/14-04
12
114-008 or M81969/14-06
08
Use the appropriate plastic tool. There is one tool
for each contact size.
CONTACT INSERTION
Insert the contact into the crimping tool.
Insert the wire into the contact.
Insert the wire into the slot of the colored end of
tool. Pull the wire until the contact butts against
the tool.
Insert the contact in the module cavity. Push the
contact fully home. Then remove the tool and
lightly pull back on the wire to make sure that the
contact is fully seated.
CONTACT WITHDRAWAL
Tighten the crimping tool fully. The handles will
not release until the tool is fully bottomed.
Remove and inspect the completed termination.
The contact must have 8 markings, and the wire
must be seen in the contact side hole.
For extraction, insert the wire in the slot of
the white end of the tool. Slide the tool into
the cavity and push it in until butts against the
contact shoulder.
For the use of a shielded version, do not forget to slide the cables in the chimney before crimping the contacts.
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 42
Press the wire between the fingers and the tool.
Then pull the overall wire and tool back.
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 43
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
USER MANUAL
USER MANUAL
Module Insertion and Extraction
Mounting the Receptacle Keying Component
MODULE INSERTION
The module must be inserted from the rear side of
the housing. The module polarization key must be
visible from the marked side of the housing.
MODULE EXTRACTION
For extraction use the tool part number
057-0289-00 A or B.
Note the tool’s different orientation depending on
the A, B, C or D cavities.
Manually push the module into the cavity until the
module’s rear should butt against the shell.
For sealed modules, use the insertion tool part
number 057-0699-00 A or B.
Check that the module is properly seated either by
pulling back the wires or by pushing the module
from the front of the housing.
Slide the tool around the cable. Then push the
tool inside the cavity until the tool butts against
the shell.
Press the cable between the tool and the fingers
and pull back. If the module is not wired, use the
same tool, but push the module from the front of
the housing.
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 44
The receptacle keying component must be inserted
from the rear side of the receptacle housing. The
component can be rotated in 60° increments.
Orientation is indicated by the largest keyway.
Insert the nut from the front of the
receptacle housing.
For mounting and dismounting, use the tool
057-0590-80.
Tighten the nut with the tool, by applying a
0.15 ±0.02 daN.m (13.3 ±6.1 in. lbf.) coupling torque.
Mounting the Plug Keying Component
Use the plug keying component corresponding
to the receptacle keying component (same
color code).
Insert the plug keying component in the front side
of the plug housing. Make sure that it has the same
orientation as the receptacle key. Then seat the
plug keying component manually by pushing it
fully into the cavity.
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 45
DEUTSCH DMC-M Series Connectors
Multicavity EN4165 Connectors
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
USER MANUAL
USER MANUAL
Free Plug/Receptacle Coupling
Shielded Accessories Assembly
Use the tool part number 057-0592-80 or a
standard allen key and apply a 0.1 ±0.03 daN.m
(8.8 ±2.6 in. lbf.) coupling torque.
Choose the appropriate plug or receptacle
accessory. Insert the accessory in the housing.
Make sure that the marking of the accessory is in
front of the respective housing’s cavities.
Insert the chimneys in their cavities.
Mounting Shielded Braid on Chimney
Fit the accessory cover, and tighten the overall screws by applying a 0.05 +0.02 daN.m (4.4 +1.7 in. lbf.)
coupling torque with a standard allen key.
Slide the chimney and the shielded braid around
the cable.
Slide the shielded braid and the 3 mm band strap
ring over the chimney.
Use the tool 05 7-0450-00 to tighten the ring
around the shielded braid over the chimney.
Insert the module in the housing.
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 46
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
PAGE 47
LET’S CONNECT
We make it easy to connect with our experts and are ready to
provide all the support you need. Just call your local support number or visit
www.te.com/industrial to chat with a Product Information Specialist.
Technical Support
te.com/support-center
North America
+1 800 522 6752
Asia Pacific
+86 400 820 6015
North America (Toll)
+1 717 986 7777
Japan
+81 044 844 8180
EMEA/South Africa
+800 0440 5100
Australia
+61 2 9554 2695
EMEA (Toll)
+31 73 624 6999
New Zealand
+64 (0) 9 634 4580
India (Toll-Free)
+800 440 5100
The Rugged, Modular Solution for Flexible, Reliable
Aerospace Connectivity
te.com/dmc-m
AMP, AGASTAT, CII, DEUTSCH, HARTMAN, KILOVAC, MICRODOT, NANONICS, POLAMCO,
Raychem, Rochester, SEACON, TE, TE Connectivity and the TE connectivity (logo) are trademarks of the TE
Connectivity Ltd. family of companies. Other products, logos, and company names mentioned herein may be
trademarks of their respective owners.
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information herein,
nothing herein constitutes any guarantee that such information is error-free, or any other representation,
warranty or guarantee that the information is accurate, correct, reliable or current. The TE entity issuing this
publication reserves the right to make any adjustments to the information contained herein at any time without
notice. All implied warranties regarding the information contained herein, including, but not limited to, any
implied warranties of merchantability or fitness for a particular purpose are expressly disclaimed. The dimensions
herein are for reference purposes only and are subject to change without notice. Specifications are subject to
change without notice.
Consult TE for the latest dimensions and design specifications.
© 2019 TE Connectivity Ltd. family of companies All Rights Reserved.
1-1773886-6 07/19
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS